| Customization: | Available |
|---|---|
| Certification: | RoHS |
| Features1: | Glass Passivated Chip |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Part Name
CAN FD Transceiver with Wake-Up Pattern (WUP) Option MCP2542FD/4FD, MCP2542WFD/4WF
Features
•Supports CAN 2.0 and CAN with Flexible Data Rate (CAN FD) Physical Layer Transceiver Requirements
•Optimized for CAN FD at 2, 5 and 8 Mbps Operation
-Maximum propagation delay: 120 ns
-Loop delay symmetry: -10%/+10% (2 Mbps)
•MCP2542FD/4FD:
-Wake-up on CAN activity, 3.6 μs filter time
•MCP2542WFD/4WFD:
-Wake-up on Pattern (WUP), as specified in ISO11898-2:2015, 3.6 μs activity filter time
•Implements ISO11898-2:2003, ISO11898-5:2007, and ISO/DIS11898-2:2015
•Qualification: AEC-Q100 Rev. G, Grade 0 (-40°C to +150°C)
•Very Low Standby Current (4 μA, typical)
•VIO Supply Pin to Interface Directly to CAN Controllers and Microcontrollers with 1.8V to 5V I/O
•CAN Bus Pins are Disconnected when Device is Unpowered
-An unpowered node or brown-out event will not load the CAN bus
-Device is unpowered if VDD or VIO drop below its POR level
•Detection of Ground Fault:
-Permanent Dominant detection on TXD
-Permanent Dominant detection on bus
•Automatic Thermal Shutdown Protection
•Suitable for 12V and 24V Systems
•Meets or Exceeds Stringent Automotive Design Requirements Including "Hardware Requirements for LIN, CAN and FlexRay Interfaces in Automotive Applications", Version 1.3, May 2012
-Conducted emissions @ 2 Mbps with Common-Mode Choke (CMC)
-Direct Power Injection (DPI) @ 2 Mbps with CMC
•Meets SAE J2962/2 "Communication Transceiver Qualification Requirements - CAN"
-Radiated emissions @ 2 Mbps without a CMC
•High Electrostatic Discharge (ESD) Protection on CANH and CANL, meeting IEC61000-4-2 up to ±13 kV
•Temperature ranges:
-Extended (E): -40°C to +125°C
-High (H): -40°C to +150°C
Applications
CAN 2.0 and CAN FD networks in Automotive, Industrial, Aerospace, Medical, and Consumer applications.
1. What service do you have ?
We are supplier of diode, bridge rectifiers and automotive rectifier diode. and mosfet ,We could supply competitive price and fast delivery and good quality with prompt service, We have our own R&D team , and Engineer to ensure to offer the best service to clients .
2. May I have some samples for testing?
We offer free samples for our customers and they only need to pay the freight for samples.
3. What about the delivery ?
Usually the lead time is about 1-4 weeks after receiving payment. For normal parts , we have the quantity in stock.
4. What about the payment terms ?
This can be discussed based on the actual order situation.
5. What about the shipment terms ?
FOB shenzhen by sea; We also work with DHL, FEDEX, TNT and etc. For large quantity , it's up to clients to choose the freight forwarder, our we can offer the service to assist clients
6. Do you hae any minimum order quantity requirement?
Based on the different products, for firt trial order to test, we can offer the quantity based on clients request, for repeat order, MOQ is based on the minimum packaging quantity.
){kind=link}